Steel Plate Specification:
Thickness:0.3mm-100mm,
Width:200-3000mm.
Application:304N Stainless Steel is used for a wide variety of home and commercial applications.
Surface treatment:No.1,2B,BA,No.4,Mirror, HL,or as customers' requirements
304N Stainless Steel Introduction
Type 304N is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding. As a result, this alloy can be used in the “as-welded” condition, even in severe corrosive conditions. It often eliminates the necessity of annealing weldments except for applications specifying stress relief. It has slightly lower mechanical properties than Type 304.
304N Stainless Steel Usage
Chemical industry equipment; industrial tanks; general application medical instrument; tableware kitchenware; architectural purpose; milk&food processing acidities,; hospital equipment; bath-tub; reflector; mirror; interior-exterior decoration for building; architectural purposes; escalators; kitchenware vehicles.
304 Stainless Steel Typical Chemical Requirements(%)
Type | C | Mn | P | S | Si | Cr | Ni | N |
ASTM 304 | ≤ 0.08 | ≤ 2.00 | ≤ 0.045 | ≤ 0.030 | ≤ 0.75 | 18.0--20.0 | 8.0--10.5 | 0.10 |
ASTM 304L | ≤ 0.03 | ≤ 2.00 | ≤ 0.045 | ≤ 0.030 | ≤ 0.75 | 18.0--20.0 | 8.0--12.0 | 0.10 |
ASTM 304H | 0.04--0.10 | ≤ 2.00 | ≤ 0.045 | ≤ 0.030 | ≤ 0.75 | 18.0--20.0 | 8.0--10.5 | -- |
ASTM 304N | ≤ 0.08 | ≤ 2.00 | ≤ 0.045 | ≤ 0.030 | ≤ 0.75 | 18.0--20.0 | 8.0--10.5 | 0.10--0.16 |
304 Stainless Steel Mechanical Test Requirements(%)
Type | Tensile Strength, min | Yield Strength, min | Elongation in 2 in.or 50mm, min, % | Hardness, max |
ksi | MPa | ksi | Mpa | HB | HRB | HV |
ASTM 304 | 75 | 515 | 30 | 205 | 40 | 201 | 92 | -- |
ASTM 304L | 70 | 485 | 25 | 170 | 40 | 201 | 92 | -- |
ASTM 304H | 75 | 515 | 30 | 205 | 40 | 201 | 92 | -- |
ASTM 304N | 80 | 550 | 35 | 240 | 30 | 217 | 95 | -- |
Product Tags:
|
|
ASTM A240, JIS G4350 304N Stainless Steel Images
|
